ABRITES MN00C FULL MB SPECIAL FUNC SET

The Full Mercedes-Benz cars package includes the MN030, MN032, MN033, MN034 and MN035 licenses. Below you can see what each one of them covers as functionalities.

MN035 VGS4-NAG2 FBS4 virgin/personalization via ABPROG license is dedicated to work with VGS4-NAG2 7G-Tronic TCU of the FBS4/DAS4 generation.

Functionalities:

Read FBS4 data from VGS4-NAG2 modules with the help of ABPROG
Set VGS4-NAG2 modules to virgin state using ABPROG
Write FBS4 personalization data to the TCU using ABPROG. Writing is also available via the internal CAN-BUS for owners of MN034

ZN030 ABPROG programmer, AVDI, and Active AMS are required!

MN033 is dedicated to resolving a problem with the “ELV Component Fault” which is preventing the vehicle from being started and driven.
This is a common fault in the Electronic Steering Lock (ESL/ELV) modules. The MN033 enables you to clear the critical error which blocks the vehicle’s electronic steering lock.
This function is performed with a direct connection to the ELV diagnostic line. It can be executed direct in the vehicle or on bench!

Supported vehicles:

ALL FBS4 vehicles with ESL/ELV modules!

The usage of the ZN051 ABRITES Distribution Box is recommended for this license.

MN032 is a world leader in terms of Mercedes-Benz vehicles module replacement, both for new and used control units.

Functionalities:

Set FBS4 Electronic Control Modules to virgin state
Read the personalization data from a FBS4 Control Modules and save it to a file
Program personalization data from a previously saved file to a FBS4 Control Module
FBS4 Control Modules Activation
Display FBS4 status of Control Modules including assembled in hybrid and electric vehicles
VIN programming

Currently supported FBS4 – Control Modules:

by OBDII – Read FBS4 data, Program FBS4 data (Personalize), set to virgin state all MED17, EDC17, SID310, Delphi-CRD3 ECUs, (CR40, CR41, CR42, CR43, CR6, CR60, CR61, MED40, MED41, MED177, MED1773, MED1775, CRR1, CRR1+, CRD3, CRD3S2). Fully supported by OBDII is also 48V started generators from family INV20EM01 (hybrid vehicles)
by OBDII – Read FBS4 data from all MRD1, MRG1, MRG2, CRR2, EMS71 (no restrictions about production year!)
by DSBOX and on bench connection to the unit – set to virgin state MRD1, MRG1, CRR2 produced before 2021. ZN051 Distribution box and EP003 are required.
by DSBOX/ABProg and on bench connection to the unit – all DSM/DSM222 and transmission control units VGS-DCT (dual clutch transmission) and VGSNAG3 (9-g tronic). ZN051 Distribution box and EP003 are required.
ECU MRD1, MRG1 (manufactured up to 2021) – Bench connection using ZN051 Distribution box and EP003 are required.
Direct Shift Module (DSM) – ABPROG (ZN030) is required to connect to the module’s microcontroller to read and extract the needed data directly from it.

Required tools:

ZN051 Abrites Distribution Box
ZN030 Abrites ABPROG
CB030 Mercedes-Benz MD1/MG1 ECU connection cable for FBS4 Manager and ECU Programming Tool
CB403 Extended Cable Set for all TCUs which require bench connection

AVDI with active AMS is required.

VGS-NAG2 FBS4 Transmission control units are also supported for renewal.

The newly added modules include:

• ECU CRR1 (SID307) and CRR1+(SID310) – Done completely by OBD.
• ECU MRD1, MRG1 (manufactured up to 2021) – Bench connection using ZN051 Distribution box and EP003 are required.
• ECU CRR2 (MD1CS006) – Bench connection using ZN051 Distribution box and EP003 are required.
• ECU MED41 (MED17.7.7) – Bench connection using ZN051 Distribution box and EP003 are required.
• Transmission Control Unit VGSNAG3 (9-Gear) – Bench connection using ZN051 Distribution box and EP003 are required.
• Transmission Control Unit VGS2-FDCT (Dual Clutch Transmission)- Bench connection using ZN051 Distribution box and EP003 are required.
• Direct Shift Module (DSM) – ABPROG (ZN030) is required to connect to the module’s microcontroller and read data directly from it to extract the data and use it with the Abrites software.

FBS3 functionalities

Module replacement:

Service password reading
Read/Save/Update FBS Data
Transfer FBS Data to a replacement unit
Make each DAS/FBS module virgin, personalise and activate it
Read/Save/Update Coding (the only way to avoid online SCN coding)
Transfer Coding to a replacement unit

Key programming:

Easily extract the EZS/EIS key password
Program all types of DAS2 keys
Program Infra Red keys to DAS3 (FBS3)
Enable and disable key positions

Supported Models:

W202/W208/W210
W203/W209/W211/W219
W169/W245
W220/W215/R230
W204/W207/W212/W218
W221/W216/W251/W164/X164
W176/W246/W242/W117
W166/X166

Supported Modules are all DAS related modules

ECUs
TCUs (7G-Tronic)
ISM
DSM
ESL/EZS
EIS/ELV

Other features:

Program the Abrites Emulators for Mercedes vehicles (EM001, EM004, EM005, EM008, EM012, EM014, EM018)
Reset the mileage of any supported EZS/EIS.

Additional and required tools:

ZN051 Abrites Distribution Box
ZN002 Abrites PROTAG programmer
ZN030 Abrites ABPROG
Abrites IR keys, keys with replica shells and Abrites IR PCBs: TA13, TA14, TA15, TA21, TA22, TA52

The ZN076 is highly reccomended for faster reading information from the EZS/EIS of Mercedes-Benz vehicles with IR locks.

N.B. Please note that you will require an AVDI interface with an active AMS in order to use this special function.

The MN030 is the latest development dedicated to odometer calibration and module replacement by OBDII for dashboards of FBS4 vehicles equipped with IC213 or IC222 dashboard

Main functionalities:

Blocks synchronisation between the Instrument Cluster and the EZS (for models with IC213)
Allows successful mileage calibration
Allows modules replacement (dashboard) – Make virgin and Adapt
Different retrofit options like update from analogue to digital dials

Supported models:

W213
W205
W222
W217
W238
W253
W257
W463
W447 (with IC213)
related models
Models with dashboard IC222 (require emulator*)

*EM008/EM018/EM014 is used for w205 and w222 (both before facelift)

An AVDI interface with a valid AMS subscription are required for the purchase and use of this package.