Altronix ACMS8 Dual Input Access Power Controller, 8 Fuse Protected Output Board
Item #:
060-2205
Product Info
Altronix
Altronix ACMS8 is UL listed sub-assemblies designed to be used in Altronix wall and rack mount enclosures. Input power to ACMS8 is to be derived from eFlow series power supplies. Dual input design allows power to be steered from two (2) independent low voltage 5 to 24 VDC power sources into eight (8) independently controlled fuse protected outputs. In ACMS8, these power outputs can also be converted to dry form “C” contacts. Outputs are activated by an open collector sink, normally open (NO) or normally closed (NC) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc.
- Eight (8) Individually Controlled trigger inputs: Normally open (NO) inputs, Normally closed (NC) inputs, Open collector sink inputs, Wet Input (5VDC – 24VDC) with 10K resistor, or combination
- Eight (8) selectable 5VDC – 24VDC independently controlled outputs or eight (8) indepently controlled Form “C” relay outputs: Fail-Safe and/or Fail-Secure power outputs, Form “C” Relays. Contacts rated @ 2.5A, Auxiliary power outputs (unswitched), or combination
- Red LEDs indicate outputs are triggered, blue LED indicates FACP disconnect is triggered
- Individual outputs may be set to OFF position for servicing
- Selectable to follow power Input 1 or Input 2
- Individual output voltage is the same as the input voltage of the input selected
- Surge suppression
- Fire Alarm disconnect (latching or non-latching) is individually selectable for any or all of the eight (8) outputs
- FACP output relay [NC] contact or provides 10k resistance with [EOL JMP] intact
Item Specifications
-
Distribution Board
-
0.90 lbs per EA