Door Reinforcement

Offset Guard Plates are used on vestibule doors with projecting door casings (for doors that are not flush with the frame). These plates are easily installed by drilling only 2 holes and using the pair of through bolts and nuts. The guards are made of cold rolled steel and have a satin stainless finish. The 14” (35.5cm) overall length extends 3” (7.6cm) beyond the average lock face, protecting against unauthorized, forcible entry. There are 4 sizes available. Guard plates come complete with all necessary hardware and illustrated instructions.

Door reinforcement for dead bolt & key in knob locks

Pro-lok’s 7” in. steel latch protector plate is designed to protect and obstruct access to the latch or deadbolt on out-swinging doors. Notched at the center for a 3-1/2? in. or smaller rose setting. Hardware included.

Offset Guard Plates are used on vestibule doors with projecting door casings (for doors that are not flush with the frame). These plates are easily installed by drilling only 2 holes and using the pair of through bolts and nuts. The guards are made of cold rolled steel and have a satin stainless finish. The 14” (35.5cm) overall length extends 3” (7.6cm) beyond the average lock face, protecting against unauthorized, forcible entry. There are 4 sizes available. Guard plates come complete with all necessary hardware and illustrated instructions.

For use on doors that are flush with frames. The solid bar, interlocking with the ball on the strike plate, permits the door to be slightly opened to allow viewing. The hinged bar allows the door guard to be positioned 180 degrees away from the door when not in use. Edge protection plate, furnished with cast brass door guards only, minimizes the chance for marring the door or frame.

All units solid 22 gauge brass, bronze, or stainless steel, fit square of bevel edge doors. Edge prep recessed to accept all standard latches 1” or 1-1/8” wide x 2-1/4” high. Latch mounting holes 1-5/8” on center & tapped to accept 8-32 machine screws. For installing cylindrical door locks with 2” or 2-1/8” bore.

2-3/4” Backset

Door reinforcer for cylindrical deadbolts with 2-1/8” bore