Search in Brand
Shop by Category
Search Results
Major LMB-12 Lock Mounting Bracket
For mortise locks in hollow metal doors. Economy version – mounts to steel door with four 8-32 screws (supplied). Zinc plated.
Major AG5-A Aluma-Guard, Aluminum Finish
Major’s Aluma-Guard is designed to protect aluminum framed, glass, store front doors. It forms a shield that will protect both the latch area from attack and the lock cylinder from wrenching. The AG-5 is formed from cold rolled steel that is 6-1/2” high, 3-1/2” wide & 7/64” thick. Mounting is easy with one carriage bolt in the top and a drive rivet in the bottom and can be installed with the lock still in the door. Available in aluminum and duranodic powdercoat finishes.
Major LSA-1 Locksmith Screw Assortment
An assortment containing 18 of the most commonly used and misplaced screws that are required when servicing locks. The LSA-1 kit contains mortise cylinder cam screws, cylinder set screws, face plate screws and others than can be missing or lost when on the job
Major 5002-1-9A Octopod Surface Mounted Deadbolt, 9" Rod, Aluminum
5002 Series Single Point / 1 Locking Rod. Aluminum Powdercoat – 3/8” diameter x 9” Locking Rod – #1 Gear for standard mortise cylinders. A 360 degree rotation of the key will drive the locking rod 2 3/8 inches. All required parts for installation supplied including one rod guide and both Phillips and one-way screws, cylinder is not included. Requires a 1-1/8 inch mortise cylinder.
Major CGA-5 Cylinder Guard, Aluminum (5/pk)
Free-spinning tapered cone shape. Resistant to channel locks, vise grips, pipe wrenches, etc. Tough, hardened steel for durability. Wave washer supplied to eliminate sloppiness of installation.
Major LMB-01 Lock Mounting Bracket
The LMB-01 will make installing cylindrical knob locks or dead-bolts on metal doors now faster and easier than ever. The LMB-01 mounting bracket is stamped from 11 gauge cold rolled steel for strength, installed with pop-rivets for convenience, and supplied with an adhesive template for accuracy. The LMB-01 mounting bracket is also cut out in the center to allow installations on metal doors with a center seam. The template is marked for 1” and 1-1/8” faceplate cutouts as well as for bracket mounting holes and center lines to locate the crossbore.
Major HIT-45RB4 Router Bit Titanium Coated For Aluminum
Single flute 1/4” down shear router bit used to route openings in aluminum doors and frames
Major AG5-D Aluma-Guard, Duranodic Finish
Major’s Aluma-Guard is designed to protect aluminum framed, glass, store front doors. It forms a shield that will protect both the latch area from attack and the lock cylinder from wrenching. The AG-5 is formed from cold rolled steel that is 6-1/2” high, 3-1/2” wide & 7/64” thick. Mounting is easy with one carriage bolt in the top and a drive rivet in the bottom and can be installed with the lock still in the door. Available in aluminum and duranodic powdercoat finishes.
Major MDLT-1 Pit Bull Metal Door Latch Forming Tool
Latch forming tool for lock installations, for use on standard 18 gauge steel doors.