Search Results

For mortise locks in hollow metal doors. Economy version – mounts to steel door with four 8-32 screws (supplied). Zinc plated.

Major’s Aluma-Guard is designed to protect aluminum framed, glass, store front doors. It forms a shield that will protect both the latch area from attack and the lock cylinder from wrenching. The AG-5 is formed from cold rolled steel that is 6-1/2” high, 3-1/2” wide & 7/64” thick. Mounting is easy with one carriage bolt in the top and a drive rivet in the bottom and can be installed with the lock still in the door. Available in aluminum and duranodic powdercoat finishes.

An assortment containing 18 of the most commonly used and misplaced screws that are required when servicing locks. The LSA-1 kit contains mortise cylinder cam screws, cylinder set screws, face plate screws and others than can be missing or lost when on the job

5002 Series Single Point / 1 Locking Rod. Aluminum Powdercoat – 3/8” diameter x 9” Locking Rod – #1 Gear for standard mortise cylinders. A 360 degree rotation of the key will drive the locking rod 2 3/8 inches. All required parts for installation supplied including one rod guide and both Phillips and one-way screws, cylinder is not included. Requires a 1-1/8 inch mortise cylinder.

Free-spinning tapered cone shape. Resistant to channel locks, vise grips, pipe wrenches, etc. Tough, hardened steel for durability. Wave washer supplied to eliminate sloppiness of installation.

The LMB-01 will make installing cylindrical knob locks or dead-bolts on metal doors now faster and easier than ever. The LMB-01 mounting bracket is stamped from 11 gauge cold rolled steel for strength, installed with pop-rivets for convenience, and supplied with an adhesive template for accuracy. The LMB-01 mounting bracket is also cut out in the center to allow installations on metal doors with a center seam. The template is marked for 1” and 1-1/8” faceplate cutouts as well as for bracket mounting holes and center lines to locate the crossbore.

Quickly service Schlage locks with this tool.

Single flute 1/4” down shear router bit used to route openings in aluminum doors and frames

Major’s Aluma-Guard is designed to protect aluminum framed, glass, store front doors. It forms a shield that will protect both the latch area from attack and the lock cylinder from wrenching. The AG-5 is formed from cold rolled steel that is 6-1/2” high, 3-1/2” wide & 7/64” thick. Mounting is easy with one carriage bolt in the top and a drive rivet in the bottom and can be installed with the lock still in the door. Available in aluminum and duranodic powdercoat finishes.

Latch forming tool for lock installations, for use on standard 18 gauge steel doors.